Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

OPTIMUS Foundation CPU Block - Acrylic Top - Satin Silver Billet Mount - Nickel Cold Plate - Intel

Forsiden / Datautstyr / PC-Komponenter / Kjøling / OPTIMUS Foundation CPU Block - Acrylic Top - Satin Silver Billet Mount - Nickel Cold Plate - Intel
OPTIMUS Foundation CPU Block - Acrylic Top - Satin Silver Billet Mount - Nickel Cold Plate - Intel (op-cpu-fou-a-n-intel)

OPTIMUS Foundation CPU Block - Acrylic Top - Satin Silver Billet Mount - Nickel Cold Plate - Intel

1 730,-
1 384,- ekskl. mva
Sartor 3 Lagunen 0 Fjernlager 0



  • TOP PLATE: Plexiglas® cast acrylic or Röchling-brand black acetal
  • COLD PLATE: US-sourced premium C110-grade copper, guaranteed ASTM B187 spec
  • COLD PLATE FINISH: Raw copper or Pro-XE nickel
  • BRACKET: US-sourced machined 6061 aluminum, satin hard anodized
  • O-RINGS: US-made plasticizer-free EPDM o-rings
  • SCREWS: 18-8 stainless steel or black oxide over stainless steel mounting screws, stainless steel cold plate screws
  • MOUNTING: Optimus-made CNCed stainless steel posts and 6061 thumbscrews


  • MOUNTING: Intel LGA-1200, LGA-115X, LGA-20XX. Not compatible with LGA-3647
  • COOLING: Compatible with all consumer and HEDT Intel CPUs, including 18 core X-series
  • MODULARITY: Modular design for swapping mounting plates, cold plates and tops

In The Box

  • 1 x Foundation CPU Block
  • 4 x Optimus CNC Mounting Posts
  • 4 x Optimus CNC Thumb Screws
  • 4 x Optimus CNC Thumb Nuts
  • 1 x Thermal paste syringe
  • 1 x Installation diagram (below)



  • COPPER VS NICKEL COLD PLATE? Choose raw copper for
    highest theoretical performance (depends on overclocking and overall
    system). Choose nickel for aesthetics and/or liquid metal compatibility
  • ACRYLIC VS ACETAL? Our cast acrylic is actually far
    stronger than acetal, the traditional professional choice. Acetal won't
    ever crack, but it's soft and will deform with pressure and easily
    scratch. Our cast acrylic will survive far more abuse than acetal. So
    for all users, acrylic is recommended, unless you want the black look.
  • LIQUID METAL? BARE DIE?Go for it! Remember, liquid
    metal will etch copper immediately, though some builders like the
    performance of pure copper. Liquid metal will discolor nickel, but
    etching will take far longer. In both cases, performance of the cold
    plate won't be affected.
  • THERMAL PASTE? We include US-made Ceramique thermal
    paste. However, numerous thermal pastes are also excellent. Thermal
    Grizzly Kryonaut and Arctic MX4 2019 are two of the highest performance
    we have tested.
  • FLOW DIRECTION? Fluid needs to flow in a specific
    direction -- center of fins and then out. On acrylic blocks, the "in" is
    connected to the center channel. On acetal blocks, the "out" shows the
    fins inside, while the fins can't be seen on the "in" port.
  • FLUSHING?All Optimus products have already been
    cleaned before shipping. You'll only need to flush your radiators and
    non-Optimus products. In fact, heavy system prep chemicals can be
    detrimental if they remain in small quantities in your loop. This can
    easily happen with fluid pressurized into o-ring grooves through
  • CLEANING? Microfiber is your friend. Dish soap and
    water is ideal for our products. Always use microfiber glass cloths to
    prevent any scratches, especially on cold plates. Do not scrub, simply
    hand rinse. Isopropyl alcohol is not needed and can cause discoloration.
  • COPPER OXIDATION? Copper will immediately begin to
    oxidize (turn brown) when exposed to air. This is normal and expected
    and won't affect performance unless the oxidization is extreme, like the
    Statue of Liberty. But you're not leaving your blocks out by the ocean,
    are you?

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.