Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

OPTIMUS Foundation CPU Block - Acrylic Top - Black Billet Mount - Copper Cold Plate - AMD

Forsiden Vannkjøling & Modding Vannblokker Prosessor OPTIMUS Foundation CPU Block - Acrylic Top - Black Billet Mount - Copper Cold Plate - AMD
Produktet er ikke lenger i vårt sortiment. Ta kontakt om du trenger hjelp til å finne et erstatningsprodukt.
OPTIMUS Foundation CPU Block - Acrylic Top - Black Billet Mount - Copper Cold Plate - AMD (OP-CPU-FOU-AC-BL-C-AMD)

OPTIMUS Foundation CPU Block - Acrylic Top - Black Billet Mount - Copper Cold Plate - AMD

Varenr.:
OP-CPU-FOU-AC-BL-C-AMD
Beskrivelse


   
      SPECIFICATIONS


Materials


  • TOP PLATE: Cast acrylic from Plexiglas® or black acetal from Röchling
  • COLD PLATE: US-sourced premium C110-grade copper, guaranteed ASTM B187 spec
  • COLD PLATE FINISH: Raw copper or Pro-XE  nickel
  • BRACKET: US-sourced machined 6061 aluminum, satin anodized
  • O-RINGS: US-made plasticizer-free EPDM o-rings
  • SCREWS: 18-8 stainless steel or black oxide over stainless steel mounting screws, stainless steel cold plate screws
  • MOUNTING: Optimus-made CNCed posts and thumbscrews

Compatibility


  • MOUNTING: AMD AM4 and AM3 sockets. Not compatible with Threadripper TR4
  • COOLING: Compatible with all Ryzen series, including 3000 series with 16 cores
  • MODULARITY: Modular design for swapping mounting plates, cold plates and tops

 

In The Box


  • 1 x Foundation CPU Block
  • 4 x Optimus CNC Mounting Posts
  • 4 x Optimus CNC Thumb Screws
  • 1 x Thermal paste syringe

 

Instructions

FAQ


  • COPPER VS NICKEL COLD PLATE? Choose raw copper for
    highest theoretical performance (depends on overclocking and overall
    system). Choose nickel for aesthetics and/or liquid metal compatibility
  • ACRYLIC VS ACETAL? Our cast acrylic is actually far
    stronger than acetal, the traditional professional choice. Acetal won't
    ever crack, but it's soft and will deform with pressure and easily
    scratch. Our cast acrylic will survive far more abuse than acetal. So
    for all users, acrylic is recommended, unless you want the black look.
  • LIQUID METAL? BARE DIE?Go for it! Remember, liquid
    metal will etch copper immediately, though some builders like the
    performance of pure copper. Liquid metal will discolor nickel, but
    etching will take far longer. In both cases, performance of the cold
    plate won't be effected.
  • THERMAL PASTE? We include US-made Ceramique thermal
    paste. However, numerous thermal pastes are also excellent. Thermal
    Grizzly Kryonaut and Arctic MX4 2019 are two of the highest performance
    we have tested.
  • FLOW DIRECTION? Fluid needs to flow in a specific
    direction -- center of fins and then out. On acrylic blocks, the "in" is
    connected to the center channel. On acetal blocks, the "out"

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.